This is an Advanced Level kit.
This kit is recommended for experienced fabricators. Additional tooling, fixturing, levels, squares and routers are required for this build.
Please contact us using the form above to discuss suitability requirements prior to purchase.
|Finished Dimensions (LxWxH Inches)||48 x 18 x 16|
|Total Capacity||60 Gallons|
|Tank Material||Cell Cast Acrylic|
|Body Wall Thickness||1/4 Inch Nominal|
|Bottom Thickness||1/4 Inch Nominal|
|Top Thickness||1/4 Inch Nominal|
|Standard Inside Corner Radius||3/16 Inch|
|Overflow Dimensions (LxW)||6 x 6 Inches|
|Overflow Configuration||2 Piece Corner Mount|
|Overflow Wall Thickness||1/2 Inch Nominal|
|Overflow Inlet Slot Dimensions||1/4 Inch x 1-1/2 Inch|
|Assembly Method||Solvent Weld Only|
Front, back, bottom, and top panels are oversize. They will require secondary trimming and finishing operations with a hand held router.
This aquarium, like all full size Tenecor® aquariums, requires a full bottom supporting stand. Failure to use a full bottom supporting stand may result in bowing, crazing, and seam failure.