ReefPoint® DIY Low Boy Frag Tank Kit | Assorted Sizes

ReefPoint® DIY Frag Tank Kits are the perfect solution for the saltwater hobbyist. ReefPoint® kit components are dimensionally accurate to plus minus 1 millimeter to ensure perfect fit. The bonding edges are ready to glue with no prep required other than basic cleaning.

> > > KIT IS UN-DRILLED < < <
> > > KIT IS NOT DESIGNED FOR SILICONE ASSEMBLY < < <
> > > KIT MUST BE ASSEMBLED USING ACRYLIC SOLVENT < < <

What's included

• Precision machined acrylic components
• Tenecor® True-Fit Guarantee

What you will need (NOT INCLUDED)

• Solvent applicator bottle
• Acrylic solvent. We recommend Weldon® 3 or 4
• Masking tape

Additional notes

• This kit is intended for solvent bond assembly only
• The base is slightly oversize. This allows for a slight perimeter ledge to help prevent solvent from going down over the side.
• Pump & plumbing not included.